Root Galaxy J500F with Android 6.0.1 Lollipop Firmware

We have put together a detailed step-by-step instructions guide for how to root Android 6.0.1 on Galaxy J500F. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you. A reminder to carefully check what is your Samsung Galaxy J500F model, as we have mentioned earlier in this guide.

Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
"open sans", sans-serif; font-size: 15px; padding: 0px 0px 15px;">
To Remember:
  • This root method tutorial is only for Galaxy J500F. Please make sure you only download the root package for your own model number.
  • Make sure you backup all your data in your phone before proceeding as a precaution.
  • This root method works with Android 6.0.1 firmwares and all future Android updates as well.
  • Your Galaxy J5 should be on an official firmware by Samsung, not a custom ROM.
Complete Step-By-Step Instructions:
Step 1 – Download CF-Auto-Root Package for Samsung Galaxy J500F to your computer and extract the zip file. Download the appropriate file depending on your phone model number:
Step 2 – Download ODIN v3.09 which will help you to root Android 6.0.1 on Samsung Samsung Galaxy J500F.
Step 3 – Switch OFF your phone. Now press and hold the Volume Down + Home buttons together, and then press the Power button till you see a warning screen (as shown below). Press Volume Up to confirm and proceed to the Download Mode. [Tutorial: How to Enter Download Mode on Galaxy J500F]
Step 4 – Make sure you have your Samsung Galaxy J5 USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.
  • Click on ‘PDA’ and select the extracted file.
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 11 – After you see the home screen, unplug your phone from the computer.
NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.
OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:
Step 11 – Pull out the battery to turn OFF the phone forcefully.
Step 12 – Now boot (turn ON your phone) with Volume Up + Home + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.
That’s it! Your Samsung Galaxy J500F has now been rooted on Android 6.0.1 official software update. Check for the SuperSU app in your apps list to verify.

Hit +1 or LIKE to thank us!

No comments:

Powered by Blogger.